CMR account not less than 700 people in 12 countries. The group deploys tools for the areas of energy, industry and marine, by incorporating its own smart sensors.
CMR products a wide range of solutions for its buyers , from personalized service to production of products. warrants that all of its services honor the latest regulations and other quality certifications.
CMR is oriented towards the sector of renewable energies. The objective is to provide tools and reliable services to its buyers , by proposing digitization, now inevitable.
Aware of importance of its sector of activity, CMR implements processes to respect The world of tomorrow.
For this , the company implements a permanent line of conduct to all collaborators of the group, regardless their location .
The hydroelectric power station is a facility that produces electricity using the force of water. This is called hydraulic energy. The hydroelectric power station is made up of 3 main parts: the dam, the power station and the transformer.
The hydraulic dam is the key element in the operation of a hydroelectric power station. It is he who will command and direct the water in order to create electricity. Established at the level of a river or a natural watercourse, it can take several names. The dam may be "over the water," indicating that it is not holding water. It can be "locked", in this case the water supply results from the rising tides. And finally, when it retains water, it is called a "retention dam". The latter is the most competitive, as it offers the opportunity to produce large amounts of electricity. It is built in strategic places to constitute a reservoir. The water stored in this lake will be poured into penstocks and led to the hydroelectric plant.
The hydroelectric power station is settled below the dam. The force of the falling water will thus activate the turbine, which will then operate the alternator. The latter will then produce an alternating current which will be sent to the electric transformer of the hydroelectric power station. The power of the hydropower plant is fundamentally derived from the force of the water. Thus, run-of-river dams, relying on sea currents, will produce less electrical power than retention dams.
The transformer is the last key element in making hydroelectricity. This will amplify the voltage of the current that the alternator creates. This electricity will then be carried by the high and very high voltage lines.
The water that has been brought to the turbine is discharged to the river or stream through the tailrace channel.
Energy, industrial and marine players are researching actively renewable, low carbon sources of energy. Our desire is to support access to these renewable energies. How? 'Or' What ? By shaping hybrid and microgrid solutions, which improve energy and storage efficiency.
We compose intelligent instrumentation and automation systems for a cleaner world in the areas of energy, industry and marine. Since 1959, we develop services innovative and tailor-made tools: intelligent sensors, monitoring systems efficient and automation. All these products are dedicated to energy, industry and the marine industry.
Our virtues are those that guide our operations and advance our business. United, all employees who form our teams support our values and work ardently to promote them.
In addition to this, we educate our collaborators about the consumption of energy resources and limit use of & # 039; water, energy or even paper (recycling, communications, ...).
Energy and education are the guidelines of CSR policy. CMR is committed to develop its own environmental and social project activities. All employees are involved in this challenge CSR.
CMR analyzes every year its carbon footprint in order to reduce it. Actions to increase the transport of raw materials and finished products are at the heart of its concerns.
CMR compares the life cycle of its products as well as the constitution of raw materials to optimize waste recycling. The R & amp; D department centralizes its efforts on the integration of sustainable development at all levels of the company .
Energy and education are the guidelines of CSR policy. CMR is committed to deploy its own environmental and social project activities. All employees are committed in this challenge CSR.
CMR examines every year its carbon footprint in order to reduce it. Actions to perfect the transport of raw materials and finished products are at the center of its concerns.
We create and deliver turnkey solar or hybrid power plants for micro-grid, industrial or grid-connected installations.
La solution
HYDROS designed by CMR makes it possible to hybridize diesel generator installations with solar production and potentially storage.
The transformation of thermal power plants into hybrid plants brings many benefits to the customers of these facilities:
Our HYLIOS solution is fundamentally dedicated for emerging countries strongly dependent on thermal production, but releasing significant solar potential.
The difficulty of hybrid thermal power plants resides in the dimensioning of the equipment of the thermal part, the storage, and in the piloting. The goal is to ensure a continuous supply of electricity to customers.
Our HYLIOS solution is equipped with an energy flow management and control system, making it possible to meet the consumption of energy needs. This solution is usable for autonomous and nomadic mini-power plants but also for large hybrid ground installations.
Our energy management system offers many features for:
We create low voltage electrical distribution boards, lifting and automation systems to international offshore oil and gas players. CMR delivers switchgear and energy management cabinets to international distributors of production, storage, loading platforms and floating supports (FPSO ships).
CMR is a global player in the petroleum industry. We offer electrical systems for your drilling rigs, boats and wells.
Established on the Asian market, we manufacture electrical panels and distribution cabinets in cooperation with Siemens and Schneider Electric.
Using efficient and quality components, CMR meets all the requirements of the petroleum industry with complete control of prices and deadlines.
We are validated K3AD for the creation and installation of nuclear power plant measuring instruments.
Created in accordance with nuclear regulations, our equipment operates under accidental circumstances and in accordance with the service life of nuclear power plants. 60 years of know-how. CMR is recognized as a major global player in the nuclear industry.
We assure an impeccable quality of service to our customers: from engineering to qualification including mastery of the supply chain.
CMR certifies the management of the obsolescence of its products installed in more than 100 nuclear power plants since the 1980s.
We specialize in solutions for nuclear power plants and automation. Our customers regularly call on us for the supply, engineering, installation and maintenance of nuclear temperature sensors.
We bring intelligent control systems to preserve secure operations. We support our clients in the sectors of energy and industry.
CMR carries out your projects from the study, project management, testing, installation, programming, site management and commissioning.
We distribute efficient and sophisticated systems that understand the latest technology.
A global partner: we offer a local clothing thanks to support in our 12 operational sites around the world. A solution adjusted to our international customers, with installations all varied and requesting specific needs.
As an EPC, we provide unique service throughout the world: engineering, design, procurement, logistics, set-up and commissioning.
Our 60 years of engine experience allows us to standardize and maintain your electrical installations with proven reliability of instrumentation.
We develop individual components and successful adequate solutions to the requirements of your engine instrumentation:
CMR brings total management of the life cycle of products to engine and generator manufacturers. This is made doable thanks to our engineers and an perfected supply chain. CMR is your partner from the design phase to commissioning.
We install and guarantee after-sales service for all your equipment anywhere in the world.
COSTRONIC, a CMR Group subsidiary, puts all its expertise in the field of automation and electrical engineering at the service of operators of hydroelectric power stations.
We cooperate for over 30 years with end users, major design offices and turbine manufacturers to offer turnkey solutions.
We supply all electrical products for hydroelectric power plants with tools adapted to the constraints and needs of operators.
Our control solutions guarantee maximum availability of installations and their daily production. They are based on recent technological innovations to improve your plant and its operation.
With more than 2,500 completed projects, we are recognized as developers of control tools in various areas .
For more than 60 years, we have put our skills at the service of our customers.
Our goal is to drive growth by supporting customers with our solutions to build long-term relationships aligned with our Key Account Management strategy.
S128NG Monitoring Unit dedicated for all Emergency Diesel Generators (EDG) installed on the French nuclear fleet.
Integrated control and command platform & cyber security, turnkey system delivered from studies to commissioning.
